Related Products of Allegro Low Pressure Flow Adapter w/ Belt & OBAC Fitting
Allegro High Pressure SAR Full Mask w/ Personal Air Cooler
This comfortable full mask offers high pressure continuous flow protection with a unique over the shoulder hose design and an adjustable belt holds the hose and airflow valve out of the way.
Features and Specs:
LENS:
- High impact polycarbonate (meets ANSI Z87.1)
- Wide field of vision with distortion-free replaceable lens
- Anti-fog and anti-scratch coatings
- Available lens peel-offs (P/N: 9901-25)
SUSPENSION:
- Non-slip durable rubber five point harness w/mesh hairnet
- Fits under hard hats
- Unique adjustable buckle system to lock in place
SEAL:
- Hypoallergenic and chemical/Ozone resistant
- Durable silicone rubber maintains shape while in storage
- Comfortable even in extreme heat and cold environments
- Double sealing flange and deep chin pocket for better face to mask seal
EXHALATION VALVE:
- Large diameter contoured exhalation valve design, for minimal breathing resistance
- Easily accessible for fast replacement and cleaning
- Removable cover protects the exhalation valve form dirt, paint spray and from freezing
DOWN TUBE & BELT ASSEMBLY:
- 90 Degree elbow allows it to be directed over the shoulder and out of the way
- Corrugated flexible and lightweight material for greater comfort and less fatigue
- Three options available: Flow Control Valve (20-50psi)(1.38-3.45 bar), Personal Cooler (50-85 psi)(3.45-5.86 bar) or Temp Controller (55-105 psi)(3.79-7.24 bar)
- Low profile nylon adjustable waist belt, (Included with high pressure controllers)
- Plastic clip to restrain airline hose from pulling on the face piece
Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.
AllegroAir High Pressure Airline Cooling System
AllegroAir High Pressure Airline Cooling System
Designed for greater user comfort and increased worker productivity, the portable AllegroAir Airline Cooling System is the perfect solution to cool high pressure breathing air at a reduced cost. High pressure breathing air produced by air sources such as an air filtration panel or compressor cannot exceed 150 psi (10.34 bar). This lightweight yet highly effective cooling system is capable of reducing the breathing air temperature from 180º F (82.22° C) to as low as 50º F (10° C)!
NOTE: panel sold separately
Dimensions: 20″w x 21″l x 24″h
Weight: 28 lbs. (without ice)
";}}}}}}Allegro Low Pressure Flow Adapter w/ Belt & OBAC Fitting
Allegro Low Pressure Flow Adapter w/ Belt & OBAC Fitting (9910-11)
For use with a low pressure supplied air respirator. Our Low Pressure Flow Adapter allows the hood to connect to an breathing air pump or any low-pressure air source.
- Body: Plastic threaded fitting
- Fitting: OBAC
- Belt: Nylon with clip assembly
Allegro Lens Retainer with Screw/Nut
AllegroAir Low Pressure Airline Cooling System
Allegro Low Pressure Airline Cooling System-Cooler Only
Designed for greater user comfort and increased worker productivity, the portable Allegro Air Airline Cooling System is the perfect solution to cool low pressure breathing air at a reduced cost. This lightweight yet highly effective cooling system is capable of reducing the breathing air temperature from 180º F (82.22° C) to as low as 50º F (10° C)!
NOTE: pump sold separately
Dimensions: 20”w x 21”d x 24”h
Weight: 28 lbs. (without ice)
";}}}}}}Allegro 1 Worker Full Mask Breathing Air Blower Respirator System w/ 50' Hose
Allegro 1 Worker Full Mask Breathing Air Blower Respirator System w/ 50' Hose
1-Worker Full Mask Breathing Air Blower Respirator System w/ 50' Hose, Allegro Industries 9200-01A (9815-EF1). These provide a portable air source for one respirator user. They include one NIOSH approved full mask supplied air respirator, a blower, flow meter, and one 50 foot (15.2 m) breathing air hose. Includes NIOSH approved respirator.
Includes:
• Blower: 120V, 60 Hz, 3.8A.
• Face Mask Lens: High impact polycarbonate.
• Face Mask Suspension: Non-slip durable rubber five point harness.
• Face Mask Seal: Hypoallergenic and chemical/ozone resistant.
• Breathing Air Hose: Braided Vinyl, 50 Ft.
Allegro Personal Air Cooler
Allegro Personal Air Cooler-9991
Vortex Tubes are an effective, low-cost solution to respiratory cooling needs. With no moving parts, a vortex tube spins compressed air to separate the air into cold and hot air streams by forcing the compressed air through a generation chamber which spins the air centrifugally along the inner walls at a high rate of speed toward the control valve. A fraction of the hot air is discharged at the control valve. The remainder of the slower air stream is forced to counter-flow up through the center of the high-speed air stream, giving up heat, through the center of the generation chamber finally exiting through the opposite end as extremely cold air.
CONSTRUCTION: Body: Aluminum Fitting: Hansen 1/4” (0.63 cm) plug (series 1000) Stainless Steel Belt: Nylon
BENEFITS: • Uses filtered compressed air • Provides continuous cool air delivery • Easy temperature adjustment even with gloved hands • No moving parts • Exceptionally reliable • A control valve allows for temperature adjustment • Will cool compressed air by 25° F (-3.9° C) • Requires an air supply pressure range from 50 -115 psi
";}}}}}}Allegro Replacement Lens
Allegro Low Pressure Replacement Lens for 1 or 2 Man Fresh Air System (9901-09L)
- Clear Lens,
- For Use With 9901 Full Face Respirators,
- Compatible with Brand Allegro,
- Replacement Lens Only
Allegro A-1500TE Breathing Air Pump
Allegro A-1500TE Breathing Air Pump
The easiest way to meet your needs for portable air sources for up to three respirator users or two hood users. Available in explosion proof configurations for special applications. Applicable for chemical handling and clean-up. The A-1500EX meets Class I Div 1 & 2 Group D Class II Div 1 & 2 Groups F & G.
- Warning: Breathing Air Pumps are not to be used with generators
- Warning: Air inlet to the pump must be located where breathable air can be assured at all times
Allegro Pressure Gauge for A-300 & A-750 Pump
Allegro Pressure Gauge 9700-04 for A-300 & A-750 Pump
";}}}}}}Allegro Carry‐Air Two Worker Filtration Panel
Allegro Two Worker Carry‐Air Filtration Panel
Our Carry-Air™ Filtration Panels convert shop air used for pneumatic tools and equipment to clean breathable air. They provide from 1 to 8 airline respirators a portable source of up to 15, 30, 60 or 100 CFM of breathable air from 5-125 psig. The 3-stage filtration system purifies compressed air removing water, oil and particulate contaminants. An optional carbon monoxide monitor, which can be operated in AC or DC mode, activates an audible alarm when the concentration of CO exceeds 10 ppm (set for 5 ppm in Canada). The pressure regulator includes a pressure gauge and adjustment knob with locking ring. A pressure relief valve protects the CO monitor and respirators in the event of regulator failure. The Carry-Air™ AC/DC-powered unit is housed in a rugged Pelican case for portability and protection. It includes a support stand for stability and up-right operation. An AC/DC powered Wall-Mount unit is also available. Available with and without CO monitors. All models meet NIOSH requirements for point-of-attachment. Single outlet and single inlet, 100 CFM Panel ideal for filtering air anywhere within the air line systems
";}}}}}}Allegro Two Worker Double Bib Tyvek Hood Breathing Cold Air Respirator System
- (2) Hoods
- (1) Cold Air Blower
- (2) 100' Breathing Air Hose
Motor/Construction:
- 120V, 60 Hz
- 10.5A
- CFM output regulated speed control
- Exterior manifold to allow for the use of multi-air lines (single/double)
- Control panel that allows for AC temperature and fan speed adjustments
- Powder coated finish for long lasting durability
- Unit is self-contained and requires little maintenance (exception of removable, washable filter)
Hood Specifications:
Made of a poly-coated Tyvek material, this hood offers the increased protection of two bibs. The inner bib tucks inside protective garments so air flows down for a cooling effect on the body, and the outer bib secures under the arms with hook and loop to keep the hood from rising up. The hood features an extra large lens for better visibility. It offers the same convenient design with the downtube and suspension built in, making the complete hood fully disposable. NIOSH approved.
Allegro 2 Worker Full Mask Breathing Cold Air Respirator System
Allegro 2 Worker Full Mask Breathing Cold Air Respirator System
The Allegro Two Worker Cold Air Full Mask System is a portable fresh, refrigerated air supply system. This system provides comfortable and safe cooled breathing air for industrial users who require an OSHA compliant fresh air supply system, with the advantages of air-conditioned air. It can maximize productivity and minimize the possibility of heat stroke, heat exhaustion, dehydration, nausea and cramps for your workers. While this cold air system improves the worker's safety and comfort, it also helps reduce their frequency and duration of breaks on the job. This self-contained, low-maintenance unit includes a removable, washable filter and is powder-coated for a longer lasting durability.
includes
- (2) Full face masks
- (1) Cold air blower
- (2) 100ft. breathing air hose
Motor/Construction:
- 120V, 60 Hz
- 10.5A
- CFM output regulated speed control
- Exterior manifold to allow for the use of multi-air lines (single/double)
- Control panel that allows for AC temperature and fan speed adjustments
- Powder coated finish for long lasting durability
- Unit is self-contained and requires little maintenance (exception of removable, washable filter)
Full Face Mask Specifications:
Made of silicone rubber for better durability and will hold its shape even in extreme heat and cold. The double sealing flange provides an improved face-to-mask seal and a deep chin pocket provides a better, more comfortable fit. The replaceable polycarbonate lens offers a wider, distortion-free viewing area with an anti-fog, anti-scratch coating. The unique “over the shoulder” hose design clips at the collar and an adjustable belt holds the air hose out of the way of work. Includes NIOSH approved respirator(s).
Allegro A-750 Breathing Air Pump
Allegro Two Worker Pump, Model A-750, Ambient Air Pump 3/4hp Motor (9821) -Pump Only!
GENERAL DESCRIPTION:
Portable & lightweight air source for one hood user, or up to two full or half face respirator users. Solid performance in applications such as painting, cleaning, sanding, or chemical handling operations.
CONSTRUCTION:
- Rigid metal base and housing
- Brass and galvanized steel plumbing
- Quick-connect OBAC fitting
- Adjustable brass pressure relief valve
- Steel handle
- Powder coated blue
*Warning: Breathing Air Pumps are not to be used with generators
*Warning: Air inlet to the pump must be located where breathable air can be assured at all times
Allegro Wall-Air Two Worker Filtration Panel
Allegro Two Worker Wall Air Filtration Panel with CO Monitor
Our Wall-Air Filtration Panels convert shop air used for pneumatic tools and equipment to clean breathable air. They provide from 1 to 8+ airline respirators a portable source of up to 15, 30, 60 or 100 CFM of breathable air from 5-125 psig. The 3-stage filtration system purifies compressed air removing water, oil and particulate contaminants. An optional carbon monoxide monitor, which can be operated in AC or DC mode, activates an audible alarm when the concentration of CO exceeds 10 ppm (set for 5 ppm in Canada).
The pressure regulator includes a pressure gauge and adjustment knob with locking ring. An adjustable pressure relief valve protects the CO monitor and respirators in the event of regulator failure. Available with and without CO monitors. All models meet NIOSH requirements for point-of-attachment.
";}}}}}}- 1
- 2